U.S. Tile Market 1Q 2026: Imports Drop, U.S. Output Grows

U.S. ceramic tile consumption fell to 563.7 million square feet in the first quarter of 2026, down 13.4% from the same quarter last year. Nearly all of the drop came from imports, while tile made in the U.S. gained ground. Here is a visual breakdown of the Tile Council of North America’s (TCNA) 1Q 2026 market update.
1Demand Has Slipped Every Year Since 2022
U.S. tile consumption has declined four years in a row. The 2025 total of about 2.57 billion square feet was 4.9% below 2024 and roughly 16% below 2022.
Source: TCNA and U.S. Department of Commerce
The first quarter of 2026 continued the trend, with consumption down 13.4% compared with the first quarter of 2025. One quarter does not predict a full year, but it points in the same direction.
TCNA calculates consumption by adding U.S. shipments and imports, then subtracting exports:
Million sq. ft., 1Q 2026
Source: TCNA and U.S. Department of Commerce
2Imports Fell Sharply
U.S. tile imports dropped to 379.6 million square feet, down 20.4% by volume. Imports still supply about two of every three square feet of tile used in the U.S., but their share fell almost six points in a year.
Source: U.S. Department of Commerce
3Where U.S. Tile Comes From
India became the largest exporter of tile to the U.S. by volume, with an 18.3% share of imports. Spain (18.0%) and Italy (16.7%) followed closely.
Only two of the top ten countries shipped more tile than a year earlier: India (up 4.2%) and Peru (up 42.5%). Spain fell 35.2%, and Brazil fell 59.8%.
Source: U.S. Department of Commerce
4Volume and Value Tell Different Stories
Measured in dollars (including shipping, insurance, and duty), Italy is the largest source of imported tile, with 30.4% of import value. Spain follows with 24.6%, then Mexico with 10.8%.
The chart below compares each country’s share of import volume with its share of import value. Italy and Spain account for more of the spending than of the square footage, while India and Mexico supply more square footage than spending.
Source: U.S. Department of Commerce. Mexico’s volume share and India’s value share are calculated from TCNA’s reported figures.
The same pattern shows up in the average value per square foot. Imported tile averaged $1.28 per square foot, ranging from $2.34 for Italian tile to $0.60 for tile from Peru.
Source: U.S. Department of Commerce
TCNA notes that these averages depend heavily on the mix of tile each country ships. Different types and sizes of tile, not only price differences for the same product, affect the numbers.
5U.S.-Made Tile Gained Ground
While imports fell, domestic producers grew. U.S. shipments for the domestic market rose to 184.1 million square feet, and their factory sales value grew even faster.
U.S. tile exports moved the other way, falling 27.1% to 7.0 million square feet. Canada received 76.9% of those exports and Mexico 8.9%.
What This Means for Your Project
- Check where your tile is made. About two-thirds of tile used in the U.S. is still imported, so the country of origin is worth noting on any product you compare.
- Read the technical sheet closely. Imported tile may be tested under ISO methods rather than ASTM methods, so check which method and requirement each result refers to. Our guide to understanding tile testing explains what the most common tests measure.
- Compare like with like. Average prices vary widely by country because each one ships a different mix of tile. Compare products of the same type, size, and finish.
Source: TCNA, “1Q 2026 U.S. Ceramic Tile Market Update”, released May 29, 2026. Data from the U.S. Department of Commerce and the Tile Council of North America.

